Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

地震作用下纤维编织网增强钢筋混凝土柱的抗震性能分析          下载免费PDF全文

张童  雷真  朱争光  吴亚玲 《地震工程学报》2020,42(1):57-62,72

为了解地震作用下纤维编织网增强钢筋混凝土柱的抗震性能,采用钢筋、混凝土、纤维编织网浇筑纤维编织网增强钢筋混凝土柱,编织网主材为碳、玻璃纤维束;利用电液伺服加载系统为试件加载地震作用,监测相关数据,部分试件置入氯化钠溶液进行多次干湿循环。不同环境下的实验结果显示:纤维编织网层数越多,纤维编织网增强钢筋混凝土柱承载能力越强,抗震性能越好;配箍间距较大时,纤维编织网增强钢筋混凝土柱的抗震性能仅在地震作用的后期呈现较差状态;干湿循环次数越多,纤维编织网增强钢筋混凝土柱承载力越弱,抗震性能越差。对于氯盐环境而言,可增加纤维编织网增强钢筋混凝土柱的抗腐蚀措施改善抗震性能。适当增加纤维编织网的数量、降低配箍间距有利于提升纤维编织网增强钢筋混凝土柱的抗震性能。  相似文献   

2016年新疆呼图壁6.2级地震前b值异常特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

刘子璇  冯建刚  王维桐 《地震工程学报》2020,42(1):150-156

利用2009年以来中国地震台网中心地震编目资料,以2016年新疆呼图壁6.2级地震作为研究对象,采用最大似然法进行b值空间扫描计算,获取震前震中及其邻区地震b值的空间图像。研究结果显示,2016年呼图壁6.2级地震发生在震前显著低b值区域,该异常特征可能反映了地震孕育的应力积累过程,印证了b值的物理意义。  相似文献   

考虑土体性质的黄土震陷灾害区域性特征          下载免费PDF全文

许书雅  王平  王会娟  于一帆 《地震工程学报》2020,42(5):1194-1201

本研究在通渭、兰州、西吉、宝鸡、西安等多个西北典型黄土震陷灾害场地获取原状土样，通过对密度、含水率、孔隙比、塑液限等物理指标的测试，分析其与土体震陷性的关系；通过动弹性模量和阻尼比、动强度、震陷等室内动力特性试验，并结合大量前人研究资料，分析土体性质对岩土震陷灾害的区域性影响。结果表明：1）震陷系数与单一土体物性参数呈正相关或负相关关系，六盘山以西和以东的黄土震陷特性反映了明显的地区变化规律，在相同地震荷载作用下震害东轻西重；2）随着时间的推移，人类的活动增加，改变了土的含水率，导致土体上覆压力增大，在上覆压力的作用下，土体的初始孔隙数量有所减少，其固结程度越来越好，宏观表现为土体的易损性即震陷性减小。  相似文献   

基于模拟退火算法的设计反应谱标定方法     

谭启迪  薄景山  常晁瑜  韩昕  乔峰 《地震工程与工程振动》2020,(1):155-161

反应谱的标定是抗震设计的基础工作之一,模拟退火算法是基于模拟固体退火过程而提出的多参数优化组合方法。本文提出将模拟退火算法应用于设计反应谱的标定,并概述了模拟退火算法的基本原理及特点,介绍了运用MATLAB基于模拟退火算法对反应谱进行标定的过程。检验了将模拟退火算法应用于场地相关谱标定的可行性和合理性,给出了将其应用于工程场地地震安全性评价中设计反应谱标定实例。通过检验和实例分析可以看出,基于模拟退火算法的反应谱标定方法所给出的设计反应谱谱形真实地反映了原地震反应谱的特征,较客观的反映了场地相关反应谱的峰值和周期特征。  相似文献   

The tunnel seismic advance prediction method with wide illumination and a high signal-to-noise ratio     

Xinglin Lu  Xian Liao  Yao Wang  Guimei Wang  Zhihong Fu  HengMing Tai 《Geophysical Prospecting》2020,68(8):2444-2458

Tunnel seismic prediction is widely used in the field of tunnel seismic advance detection. The illumination of the target and the signal-to-noise ratio of the data are two key factors affecting the precision of data interpretation. Current seismic prospecting has shortcomings on sites: (1) The lighting shots are solely towards one side of the tunnel wall, (2) the geophones are placed far away from the tunnel face and (3) the surface waves from the tunnel wall dominate over the reflection waves, lowering the signal-to-noise ratio of the data at the tunnel wall. This paper proposes a tunnel symmetrical geometry to tackle the above challenges. The arrangement is to place 12 sources uniformly on each side of the tunnel wall and six geophones on the tunnel wall and face. Results of simulated data and measured data show that the proposed method enables (1) broad illumination of the target body, (2) the enhancement of illumination energy of the target body, and (3) higher data signal-to-noise ratio. The proposed symmetrical geometry method provides better interpretation in terms of broader coverage, higher quality and greater distance of investigation.  相似文献   

Seismic reliability assessment and the nonergodicity in the modelling parameter uncertainties     

Fatemeh Jalayer  Hossein Ebrahimian 《地震工程与结构动力学》2020,49(5):434-457

Modelling uncertainty can significantly affect the structural seismic reliability assessment. However, the limit state excursion due to this type of uncertainty may not be described by a Poisson process as it lacks renewal properties with the occurrence of each earthquake event. Furthermore, considering uncertainties related to ground motion representation by employing recorded ground motions together with modelling uncertainties is not a trivial task. Robust fragility assessment, proposed previously by the authors, employs the structural response to recorded ground motion as data in order to update prescribed seismic fragility models. Robust fragility can be extremely efficient for considering also the structural modelling uncertainties by creating a dataset of one-to-one assignments of structural model realizations and as-recorded ground motions. This can reduce the computational effort by more than 1 order of magnitude. However, it should be kept in mind that the fragility concept itself is based on the underlying assumption of Poisson-type renewal. Using the concept of updated robust reliability, considering both the uncertainty in ground motion representation based on as-recorded ground motion and non ergodic modelling uncertainties, the error introduced through structural reliability assessment by using the robust fragility is quantified. It is shown through specific application to an existing RC frame that this error is quite small when the product of the time interval and the standard deviation of failure rate is small and is on the conservative side.  相似文献   

场地类别分类方案研究     

陈国兴  丁杰发  方怡  彭艳菊  李小军 《岩土力学》2020,41(11):3509-3522

基于性能的抗震设计，要求工程师设计出具有预期抗震性能的结构，一个关键因素是地震作用的确定，这在很大程度上取决于局部场地条件。通过收集和分析北京、苏州和唐山城区956个钻孔资料，建立地表20 m和30 m深土层走时平均剪切波速VS20和VS30的关系式；现场钻探获取北京城区深105 m的典型钻孔原状土样，试验给出各类土体动剪切模量和阻尼比曲线；建立北京城区170个钻孔的场地反应计算模型，采用Nakamura提出的HVSR法和陈国兴等提出的弱震法估算场地基本周期TS值，结合国内外现行抗震规范的场地分类及一些学者对场地分类的研究成果，提出两种新的场地分类建议方案：基于等效剪切波速VSE和覆盖土层厚度H（地表至剪切波速VS ≥ 500 m/s的基岩深度）的双指标场地分类方案及基于VSE、H和TS的三指标场地分类方案。提出的场地分类方案对我国现行抗震规范场地分类方法的改进有参考价值。  相似文献   

A simple hypoplastic model with loading surface accounting for viscous and fabric effects of clays     

Merita Tafili  Theodoros Triantafyllidis 《国际地质力学数值与分析法杂志》2020,44(16):2189-2215

  相似文献